Home > Taking Photos > Basic Techniques > Framing shots with a LCD
Framing shots with a LCD
Framing a shot with the LCD is relatively worry-free when lighting conditions are ideal and shutter speeds are fast. However a digital camera is more prone to camera shake using a LCD instead of a viewfinder, especially if your camera doesn't have image stabilization.
Camera shake causes images to blur. It primarily occurs when taking photos hand-held at shutter speeds under 1/60th of a second. It also may occur when using a telephoto lens. Even if lighting is adequate and shutter speed is fast, it's good practice to hold the camera steady.
How to hold your camera
Because a digital camera is held away from your body when composing shots with a LCD, hold it with both hands. The camera can be steadied with the left hand and the right hand used for further support and to press the shutter-release button.
Keep the camera as close to your face as possible. Brace your elbows against your body for additional support. You can get additional support when needed by steadying yourself against a wall, table, car top or anything with a flat, level surface.
When a digital camera is held vertically, take extra care that your fingers don't cover the built-in flash. If you inadvertently cover part of the lens, you will see that on the LCD so you can remove your fingers before taking a photo.
